Apps for CD & DVD Drivers. Join or Sign In. Creative Labs PC-DVD Encore Driver (Windows 95/98/NT 4.0) Free. Get this Windows 95/98/NT 4.0 driver set for the PC-DVD Encore Dxr2 from Creative Labs. Latest Drivers Update. FAQ MB / Graphics Card / Mini PC FAQ Networking Contact Technical Support MB / Graphics Card / Mini PC Contact Technical Support Networking.
- Dell Cd Rom Driver
- Creative Cd Rom Driver
- Cd Rom Driver
- Dvd Cd Rom Driver
- Creative Cd-rom Driver Windows 10
| Date invented | June 1992; 28 years ago |
|---|---|
| Invented by | Creative Technology |
| Connects to | Motherboard via one of:
CD-ROM Drive via one of:
|
| Common manufacturers | Creative Technology |
The Sound Blaster 16 is a series of sound cards by Creative Technology. They are add-on boards for PCs with an ISA or PCI slot.
Get drivers and downloads for your Dell Studio XPS 1645. Download and install the latest drivers, firmware and software. So I knew I needed to get the Sound Blaster driver for Windows 10. Went to Creative's site and there thankfully was a Windows 10 version for my card (and it detected my card and wouldn't let me erroneously download a driver for the wrong card). After downloading driver did all the restarts etc.
Sound Blaster 16[edit]
Sound Blaster 16 (June 1992), the successor to the Sound Blaster Pro, introduced CD-qualitydigital audio to the Sound Blaster line. For optional wavetable synthesis, the Sound Blaster 16 also added an expansion-header for add-on MIDI-daughterboards, called a Wave Blaster connector, and a game port for optional connection with external MIDIsound modules.
The Sound Blaster 16 retained the Pro's OPL-3 support for FM synthesis, and was mostly compatible with software written for the older Sound Blaster and Sound Blaster Pro sound cards. The SB16's MPU-401 emulation was limited to UART (dumb) mode only, but this was sufficient for most MIDI software. When a daughterboard, such as the Wave Blaster, Roland SCB-7, Roland SCB-55, Yamaha DB50XG, Yamaha DB60XG was installed on the Sound Blaster, the Wave Blaster behaved like a standard MIDI device, accessible to any MPU-401 compatible MIDI software.
The ASP or CSP chip added some new features to the Sound Blaster line, such as hardware-assisted speech synthesis (through the TextAssist software), QSound audio spatialization technology for digital (PCM) wave playback, and PCM audio compression and decompression. Software needed to be written to leverage its unique abilities, yet the offered capabilities lacked compelling applications. As a result, this chip was generally ignored by the market. The ASP was a SGS-Thomson ST18932 DSP core with 16K of program RAM and 8K of data RAM.[1][2][3]
The Sound Blaster 16 featured the then widely used TEA2025 amplifier IC which, in the configuration Creative had chosen, would allow approximately 700 milliwatts (0.7 watts) per channel when used with a standard pair of unpowered, 4-Ohm multi-media speakers. Later models (typically ones with ViBRA chips) used the also then-widely used TDA1517 amplifier IC. By setting an onboard jumper, the user could select between line-level output (bypassing the on-board amplifier) and amplified-output.
The Sound Blaster 16 was hugely popular. Creative's audio revenue grew from US$40 million per year to nearly US$1 billion following the launch of the Sound Blaster 16 and related products. Rich Sorkin was General Manager of the global business during this time, responsible for product planning, product management, marketing and OEM sales. Due to its popularity and wide support, the Sound Blaster 16 is emulated in a variety of virtualization and/or emulation programs, such as DOSBox, QEMU, Bochs, VMware and VirtualBox, with varying degrees of faithfulness and compatibility.
CD-ROM Support[edit]
Early Intel PCs built after the IBM PC/AT typically only included support for one ATA interface (which controlled up to two ATA devices.) As computer needs grew it became common for a system to need more than 1 ATA interface. With the development of the CD-ROM, many computers could not support it since both devices of the one channel were already used. Some Sound Blaster 16 boards (CT2940 for example) provided an additional IDE interface to computers that had no spare ATA-ports for a CDROM, though the additional drive interface typically only supported one device rather than two, it typically only supported CD ROM drives, and it usually could not support additional hard drives.
Proprietary CD-ROM standards were also supported by several Sound Blaster 16 cards. Mitsumi (CT2700) and Philips/LMSI (CT1780) for example. Most Sound Blaster 16 cards came with the Panasonic / Matsushita interface, which resembles IDE with the 40PIN connector.
The Sound Blaster with the SCSI controller (SB 16 SCSI-2, CT1770, CT1779) was designed for use with 'High End' SCSI based CD-ROM drives. The controller did not have the on-board firmware (Boot BIOS) to start an OS from a SCSI hard drive. Normally that meant that SCSI device ID-0 and ID-1 were not used. As well, if the computer did have a SCSI hard drive with the required SCSI controller then the settings for the SCSI controller on the SB card had to be selected so that the SB SCSI-2 interface did not conflict with the main SCSI controller.
Most Sound Blaster 16 cards feature connectors for CD-audio input. This was a necessity since most operating systems and CD-ROM drives of the time did not support streaming CD-audio digitally over the main interface. The CD-audio input could also be daisy-chained from another sound generating device, such as an MPEG decoder or TV tuner card.
OPL-3 FM and CQM Synthesis options[edit]
Sound Blaster 16 cards sold separately feature a CT1747, a chip which has the discrete YamahaYMF262 OPL-3 FM synthesizer integrated. Some post-1995 cards (notably the CT2910) feature the fully compatible YMF289 FM synthesis chip instead.
Starting in late 1995, Creative utilized a cost-reduced, software-compatible replacement for the OPL-3 FM support termed CQM synthesis.[4] However, its synthesis was far from being entirely faithful to the OPL-3 chips, producing considerable distortion along with high-pitched 'squeaking' or 'ringing' artifacts in FM-synthesized music and sound effects. Boards utilizing CQM synthesis feature a CT1978 chip, or they may have CQM integrated in the case of ViBRA16C/X-based boards.
Models[edit]
The following model numbers were assigned to the Sound Blaster 16:[5]
- CT12**: CT1230, CT1231, CT1239, CT1290, CT1291, CT1299
- CT17**: CT1730, CT1740, CT1749, CT1750, CT1759, CT1770, CT1779, CT1780, CT1789, CT1790, CT1799
- CT22**: CT2230, CT2290
- CT27**: CT2700, CT2740, CT2750, CT2770
- CT28**: CT2830, CT2840
- CT29**: CT2910, CT2950
- CT41**: CT4170
Note: various PCBs with the same model number were shipped with a different configuration regarding CD-ROM interfaces, sockets and presence/absence of the ASP/CSP chip. The following models were typically equipped with an ASP/CSP socket: CT1740, CT1750, CT1770, CT1790, CT2230, CT2740, CT2950, CT2290. The Sound Blaster Easy 16 (CT2750) was sold with the ASP/CSP chip and a parallel CD-ROM port and 1 audio out.[6]
Sound Blaster VIBRA 16[edit]
The Sound Blaster VIBRA 16 was released as a cost-reduced, more integrated Sound Blaster 16 chipset targeting OEMs and the entry-level to mid-range markets. Some variants support Plug and Play for Microsoft Windowsoperating systems. It lacked separate bass and treble control, and an ASP/CSP socket. Some models even lacked the Wave Blaster connector while other came equipped with the connector. Several different revisions of the VIBRA chipset exist:
- VIBRA16S, the first revision, with an external YMF262/YMF289 OPL-3 or CT1978 CQM synthesis chip. The CT2501, CT2502 and CT2504 chips are ViBRA16S parts. The smaller CT2504 does not incorporate a bus controller, and may depend on external jumpers or a Plug and Play-compatible CT1705 chip for its logical configuration. The larger CT2501 and CT2502 integrate the bus controller.
- VIBRA16C, the next revision, which integrates Creative's CQM synthesis and a Plug-and-Play compatible bus controller into the CT2505 chip. The CT2505 is also featured as an on-board sound chip on some motherboards and on Asus Media Bus cards.
- VIBRA16X/XV, a much smaller chip extensively featured on later WavEffects cards, which also utilizes CQM synthesis.
Models[edit]
Dell Cd Rom Driver
The following model numbers were assigned to the Sound Blaster VIBRA 16:[5]
- CT12**: CT1260, CT1261, CT1262
- CT22**: CT2260
- CT28**: CT2800, CT2810, CT2860, CT2890
- CT29**: CT2900, CT2940, CT2941, CT2942, CT2943, CT2945, CT2950, CT2960, CT2970, CT2980, CT2990
- CT41**: CT4100, CT4101, CT4102, CT4130, CT4131, CT4132, CT4150, CT4173, CT4180, CT4181, CT4182
Note: various PCBs with the same model number were shipped with a different configuration regarding CD-ROM interfaces and sockets. Even among the same models variations exist; for example, some OEM-specific cards were made without the TEA2025/TDA1517 amplifier to reduce costs.
Sound Blaster 16 WavEffects[edit]
The Sound Blaster 16 WavEffects was released in 1997 as a cheaper and simpler redesign of the Sound Blaster 16. It came with Creative WaveSynth also bundled on Sound Blaster AWE64 Gold, a physical modeling software synthesizer developed by Seer Systems (led by Dave Smith), based on Sondius WaveGuide technology (developed at Stanford's CCRMA).[7][8][9] The WavEffects line also supports CQM synthesis for Adlib/OPL compatibility.
Creative Cd Rom Driver
Models[edit]
The following model numbers were assigned to the Sound Blaster 16 WavEffects:[5]
- CT417*: CT4170, CT4171, CT4173
Sound Blaster 16 PCI[edit]
In 1998, Creative Technology acquired Ensoniq and subsequently released the Sound Blaster 16 PCI. The Sound Blaster 16 PCI was based on Ensoniq AudioPCI technology and is therefore unrelated to the ISA Sound Blaster 16, Sound Blaster 16 VIBRA and Sound Blaster 16 WavEffects. It has no dedicated hardware for Adlib/OPL support, instead using the Ensoniq sample-synthesis engine to simulate it, though this simulation is considered very inaccurate compared to the original OPL chips. Fortunately it is General MIDI compatible in most games.
Models[edit]
The following model numbers were assigned to the Sound Blaster 16 PCI:[5]
- CT47**: CT4700, CT4730, CT4740, CT4750, CT4790
- CT58**: CT5801, CT5803, CT5805, CT5806, CT5807
Capacitor and sound quality issues[edit]
As many Sound Blaster 16s are now well over 20 years old, many cards suffer from symptoms related to aging capacitors, ranging from muffled or distorted output to the cards failing to function properly. In addition, with regard to the headphone amplifier design on most boards, Creative did not fully adhere the datasheets' recommendations on component values, potentially impacting the amplified output's sound quality. Some users have found that replacing the capacitors with fresh ones of the recommended values noticeably improved both amplified and line-level audio quality, in addition to restoring proper operation.[citation needed]
Daughterboard bugs[edit]
A large number of Sound Blaster 16 cards have a flawed digital sound processor on board that causes various issues with MIDI daughtercards attached to the Wave Blaster header. The problems include stuck notes, incorrect notes, and various other flaws in MIDI playback. The particular Sound Blaster 16 cards that are affected carry DSP versions 4.11, 4.12 and some 4.13. DSP versions 4.16 or later, and older DSP versions such as 4.05 do not suffer from this bug. There is no workaround for this flaw and it occurs with all operating systems since it is an issue at the hardware level.[10][11][12] The DSP version can be checked by running the 'DIAGNOSE' utility in DOS or looking at the DSP chip on the sound card. A version number is printed on the CT1740A chip usually near the CT1745A mixer chip.
Reception[edit]
Computer Gaming World in 1993 stated that 'We were not impressed with the quality of the digital audio' of the Sound Blaster 16 or 16 ASP, reporting 'pops and extra noise' and incomplete Sound Blaster compatibility. The magazine instead recommended the 'almost foolproof' Sound Blaster Pro or the original Sound Blaster.[13]
References[edit]
- ^Info on Soundblaster 16 ASPs signal prosessor., comp.sys.ibm.pc.soundcard, August 1993.
- ^Notes on programming Creative Sound Blaster series ISA cards., accessed April 9, 2020.
- ^'SGS-Thomson readies strategy via new DSP core, Electronic News, May 1, 1995'. Archived from the original on January 29, 2010. Retrieved April 9, 2020.
- ^CREATIVE ANNOUNCES INNOVATION IN PC MUSIC SYNTHESIS, 1995/08/04, Free Online Library
- ^ abcdCreative Technology List of Sound Blaster Products: http://support.creative.com/kb/ShowArticle.aspx?sid=10846
- ^'Archived copy'. Archived from the original on December 19, 2013. Retrieved December 19, 2013.CS1 maint: archived copy as title (link)
- ^'Technical Specifications of the Sound Blaster 16 WaveEffects'. Solution ID:5800: Sound Blaster ISA Cards – Information and Troubleshooting. Creative Technology Ltd. Archived from the original(specification) on February 2, 2012.
Product Information / Sound Blaster 16/32/AWE cards / Technical Specifications of the Sound Blaster 16 WaveEffects / Model Numbers: CT4171, CT4170 / The Sound Blaster 16 WavEffects is a 16-bit ISA Plug and Play audio board shipped with Creative WaveSynth. The Creative WaveSynth is a software based WaveTable Synth which provides additional voices for composition and playback. ... / Wave Synthesis: based on CreativeSynth / ...
Note: a notation 'WaveTable Synth' seems inaccurate. - ^'Creative Labs Seer WaveSynth Announcement'(press release). Creative Technology Ltd. September 24, 1996.
Creative Technology Ltd. (NASDAQ:CREAF), the world's leading provider of multimedia products for personal computers, has partnered with Seer Systems, Inc. to deliver a high quality, software synthesizer that gives wave-table audio capabilities to the Sound Blaster 16. Creative WaveSynth, combined with Creative's entire line of audio products, now gives PC makers the best complete audio solution for their customers.
Note: a notation 'wave-table audio capabilities' seems inaccurate. - ^Walker, Martin. 'Reality PC Software Synthesizer'. Sound on Sound (November 1997).
The name Sondius may seem familiar, and if I mention the AWE64 Gold soundcard and WaveSynth/waveguide synthesis, you'll probably remember the connection. Sondius provided the software technology for Creative Labs to add some basic physical modelling sounds to their latest soundcard, for more realism and expressive playing. I'm sure everyone who bought a Gold card tried these out, and they were certainly significantly better than the equivalent wavetable sounds, but not exactly jaw-dropping, and a bit of a fiddle to use. ...
Note: Creative WaveSynth is based on 'Sondius WaveGuide technology' by CCRMA. - ^Linux Hardware Compatibility HOWTO: Sound cards, accessed August 6, 2007.
- ^Help! Stuck notes with SB16 and SCD-15, comp.sys.ibm.pc.soundcard.tech, March 1995.
- ^Roland SCD-10, SCD-15 specs (stuck notes), comp.sys.ibm.pc.soundcard.tech, April 1995.
- ^Weksler, Mike; McGee, Joe (October 1993). 'CGW Sound Card Survey'. Computer Gaming World. pp. 76–83. Retrieved March 26, 2016.
External links[edit]
Windows 2000, XP or Vista doesn't recognize your CD or DVD drive after you install one or more of the following Adobe applications:
- Audition
- Encore
- Photoshop Album
- Photoshop Elements
- Premiere Elements
- Premiere Pro
- Production Premium
- Production Studio
- Soundbooth
Cd Rom Driver
Other CD and DVD burning applications, such as Roxio Easy CD Creator, are installed on the computer.
Refresh the CD and DVD drivers list in the Windows registry.
Disclaimer: The registry contains system-related information that is critical to your computer and applications. Before modifying the registry, be sure to make a backup copy of it. Adobe doesn't provide support for problems that arise from improperly modifying the registry. Adobe strongly recommends that you have experience editing system files before you modify the registry. For information on the Windows Registry Editor, see the Windows documentation or contact Microsoft Technical Support.
To refresh the CD and DVD drivers list in the Windows registry:
Important: After you refresh the driver list in the Windows registry, you may need to reinstall any other CD or DVD burning applications on your computer. If you restart Windows after this procedure and other CD or DVD burning applications do not recognize the CD or DVD drive, then reinstall those applications.
- Open Registry Editor:
- On Windows 2000 and XP: Choose Start > Run. Type regedit in the Open text box and click OK.
- On Windows Vista: Choose Start. Type regedit in the Search text box, and press Enter.
- In the left pane of Registry Editor, navigate to HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlClass and select the {4D36E965-E325-11CE-BFC1-08002BE10318} key, which appears as a folder.
- Select File > Export (Windows XP and Vista) or Registry > Export Registry File (Windows 2000).
- In the Export Registry File dialog box, select Selected Branch under Export Range, name the file (for example, CDDVDkey.reg), and click Save to save the file to the Desktop.
- In the right panel of the Registry Editor, select the LowerFilters line, and then choose Edit > Delete. Click Yes in the Confirm Key Delete dialog box.
- Select the UpperFilters line, and then choose Edit > Delete. Click Yes in the Confirm Key Delete dialog box.
- Open Device Manager:
- On Windows 2000 and XP: Choose Start > Control Panel. Double-click the System icon, click on the Hardware Tab, then click on Device Manager.
- On Windows Vista: Choose Start > Control Panel, double-click System, then click Device Manager in the Tasks pane.
- Click on the plus symbol next to DVD/CD-ROM Drives.
- For each DVD-ROM or CD-ROM drive listed, select the icon then choose Action > Uninstall.
- Windows will automatically detect and reinstall your DVD-ROM or CD-ROM drives. You can verify that the drives are installed by viewing them in Device Manager (see step 9). If the drives are not present, open Device Manger and choose Actions > Scan For Hardware Changes.
Important: If this solution doesn't resolve the problem with the application you reinstalled, then you should restore the CD and DVD drivers list in the Windows registry.
To restore the exported CD and DVD drivers list:
Dvd Cd Rom Driver
The Adobe Captivate demonstration below illustrates how to refresh the CD and DVD drivers list in the registry.
The UpperFilters and LowerFilters keys in the Windows registry store information about CD and DVD burning drivers. When you add or remove CD and DVD burning applications, these registry keys are altered and they can become corrupted. When you remove the registry keys and restart the computer, Windows refreshes the keys. Some applications may use a different burning driver than the application you reinstalled. If the other CD or DVD burning applications installed on your computer cannot access the drive after Windows refreshes the registry keys, you will need to reinstall those applications before they can access the drive.
For more information, see the following articles on the Microsoft website at www.microsoft.com:
Creative Cd-rom Driver Windows 10
- 314060: CD-ROM Access Is Missing and Messages Cite Error Code 31, Code 32, Code 19, or Code 39 After You Remove Easy CD Creator in Windows XP
- 270008: Cannot Access CD-ROM and 'Code 31' Error Message in Device Manager After You Remove Adaptec Easy CD Creator from Your Computer (Windows 2000)